How to Solve the Shear Heat of Injection Molding Machine Screw? Injection molding machine screw is generally divided into three parts: feed section, compression section, metering section. To process different materials, you should select the material of corresponding structure to obtain good workpiece processing quality. This article analyzes the structure of the injection molding machine … Read more

Solutions for 14 Kinds of Injection Molding Machine Clamping Problems The injection molding machine consists of three main parts: clamping unit, injection unit and machine bed. The mold clamping unit is used to close the mold against the force generated by injection unit during the injection and holding pressure. After that, the platen open and … Read more

30 Questions and Answers About Ejection of Injection Molding Part 2 For this issue, it is divided into two parts, this is the second one and the first part is in the following link: 30 Questions and Answers About Ejection of Injection Molding Part 1 16.  One injection molding machine, in the semi-automatic and fully … Read more

30 Questions and Answers About Ejection of Injection Molding Part 1 The main action in one cycle of the injection molding machine are : clamping, plasticizing, injection, pressure-hold, moving-platen open, ejection. And the ejection is the last action, which assure the plastic product take out and the next cycle begin successfully. So if there is … Read more

What Are the Differences Between PA66 and PA6? Differences Between PA66 and PA6 Nylon cable ties are made of nylon 66 and nylon 6. Of course, there are other materials. Nylon is also called PA, so what are the differences of PA66 and PA6? 1. Structure PA6 is polycaprolactam, while PA66 is polyhexamethylene adipate. PA66 is 12% … Read more

What Will Affect the Service Life of Plasticized Components of Injection Molding Machine? The plasticized components of the injection molding machine include screw, barrel, screw tip, screw seat and check ring. When the injection molding machine is working, the plasticized components are like the wheels of a motor vehicle. As long as it is started, it … Read more

Common Faults of High Temperature Mold Temperature Machine What can we do if there is a temperature failure in the high temperature mold temperature machine of the injection molding machine? Before learning to solve the temperature faults, let’s learn about relevant knowledge. The position occupied by the high temperature mold temperature machine in the mold is … Read more

The Methods to Solve the Iron Filings of the Trimming Die In the stamping production process of automobile covering parts, the scrap knife is usually used to cut the trimming waste in the mold. But the trimming cut also brings the small iron filings generated when the waste is cut into the mold cavity. And … Read more

How to Prevent the Rising Oil Temperature of the Injection Molding Machine? In the injection molding processing industry, the problem of rising hydraulic oil temperature is really annoying us. The increase in hydraulic oil temperature will not only affect the work of the injection molding machine, but also seriously affect the service life of it. … Read more

The Injection Molding Process and Material Analysis of Plastic Gear Plastic gears are moving towards larger sizes, more complex geometries, and higher strength nowadays. At the same time, high-performance resins and composite materials filled with long glass fibers play an important promoting role for this movements. Plastic gears have undergone a process of change from new materials … Read more